It has been a 5 month delay but over the weekend I prepped the car for spraypainting. I removed all the loose bits 'n' pieces lying in the car and taped up all the open holes on the engine.
Also realised why the 5 month break was necessary - it was hot!
Got her off the stands singlehanded (my G-d it is a low car) using the crane.
Yesterday my pal arrives with the trailer and we take the car to PPRust Panelbeaters.
Colour: Rosso Corsa. For the cognoscenti among us - Ferrari Red.
It will take about a month.
Now to sell my children for medical experiments.......!
Thursday, 28 March 2013
Wednesday, 5 December 2012
Some Movement at Last!!!
The past 2 months I have been stalled looking for a reasonable quote on spray painting the car. It seems I have at last found someone prepared to do it for less than a kidney transplant.
The only hurdle is getting the car loaded and taken to Jo'burg. And they can only do it in January. So my start date has been put out to February.
The only hurdle is getting the car loaded and taken to Jo'burg. And they can only do it in January. So my start date has been put out to February.
Tuesday, 27 November 2012
Still no Progress........
Well y'all must be wondering what further stuff I have managed to do since I got back from Bots.
To be honest, nothing, what with shooting competitions, trips to the Cape, visiting the kids etc etc. every weekend has been chock-full of activity but nothing to do with car building.
The other factor is of course the spraypainting. I have got to the stage where if I put anything on the car I am going to have to remove it if I wanta decent job done. This last weekend of the 24/25th November a buddy has hooked me up with a quality painter who can do the job for less than R10K. My next best quote was R19K - a significant gap!!!!
So let's see how this pans out.....
To be honest, nothing, what with shooting competitions, trips to the Cape, visiting the kids etc etc. every weekend has been chock-full of activity but nothing to do with car building.
The other factor is of course the spraypainting. I have got to the stage where if I put anything on the car I am going to have to remove it if I wanta decent job done. This last weekend of the 24/25th November a buddy has hooked me up with a quality painter who can do the job for less than R10K. My next best quote was R19K - a significant gap!!!!
So let's see how this pans out.....
Wednesday, 17 October 2012
Stuck in Botswana
Anyone following this blog will have noticed that I've not been active for a couple of weeks. The reason is simple - I have taken 2 weeks off from my normal D2D grind and been busy working in Botswana as part of an Operational Review team at Debswana's Orapa Diamond Mine.
I have basically finished all I can do to the car prior to painting, so when I get back my first move will be to get her to the wheel alignment shop and then the paintshop.
I have basically finished all I can do to the car prior to painting, so when I get back my first move will be to get her to the wheel alignment shop and then the paintshop.
Monday, 1 October 2012
Round up.....
There are a lot of small things going on, not enough to warrant a post all their own, but enough that they should get mention somewhere.
First, I got the rear brake disks. Those were fitted with a minimum of fuss. So now the car can be lowered. But that is not going to happen just yet.
The essential hoses for the cooling system are in, only the header tank needs fitting, and for that the scuttle needs fitting. The correct fittings for the water rail are also fitted.
I bought a rivnut gun, and I am busy drilling holes in the scuttle for the washer bottle, header tank and the brake and clutch reservoir bracket.
The spark plugs are fitted.
I am busy replacing every galvanized capscrew with stainless steel ones.
I'll tackle some wiring this Saturday.
First, I got the rear brake disks. Those were fitted with a minimum of fuss. So now the car can be lowered. But that is not going to happen just yet.
The essential hoses for the cooling system are in, only the header tank needs fitting, and for that the scuttle needs fitting. The correct fittings for the water rail are also fitted.
I bought a rivnut gun, and I am busy drilling holes in the scuttle for the washer bottle, header tank and the brake and clutch reservoir bracket.
The spark plugs are fitted.
I am busy replacing every galvanized capscrew with stainless steel ones.
I'll tackle some wiring this Saturday.
Wednesday, 19 September 2012
Coil Pack......EPIC FAIL!!!!
Ok so I run down to my local Ford dealer and I order a new coil pack, as the old one is pretty beat up and chipped.
I specifically mention I want the one with the SQUARE connector port, post 2008, so it matches my Webcon harness.
I pay R850 because it has to be ordered special.
Cool, I wait for a day and I get a call from them to say my coil pack has arrived.
Yeah, you guessed it, it is the old one with the oval connector.
The confusion came in because I asked for a Coolant Temp Sensor for a 2002 Mondeo 2.0l and she ordered the coil pack from that model as well.
Fortunately the Webcon harness comes with an oval connector (as a spare), so I spent the evening cutting off the new-style square connector and attaching the old-style oval one to the harness.
I attached the wires to the new old-style oval connector the same way they were connected to the old new-style square connector.
The worst that can happen is that the engine will not start because the spark is being delivered at BDC instead of TDC. Swop the 2 wires around I am back in business.
Doing some internet research I found that when they changed over the coil pack from the old oval type to the new square type the orientation of the wires was indeed changed over, so I disassembled my new old-style oval connector and swopped the wires. These things are not meant to be taken apart once they are put together with the result that the metal contacts are a bit munched. I will try and source a new old-style oval connector from Ford.
Confused yet??
With my luck they will send me a new new-style square one, instead of a new old-style oval one.....
Quick note to everyone reading or accessing this blog - PLEASE LEAVE COMMENTS IF YOU LIKE OR DO NOT LIKE WHAT YOU SEE AND READ!!
I see my count is on the rise - even from folks in Alaska.....?? I am trying to keep it light but unfortunately the content does require some technical talk!!
I specifically mention I want the one with the SQUARE connector port, post 2008, so it matches my Webcon harness.
I pay R850 because it has to be ordered special.
Cool, I wait for a day and I get a call from them to say my coil pack has arrived.
Yeah, you guessed it, it is the old one with the oval connector.
The confusion came in because I asked for a Coolant Temp Sensor for a 2002 Mondeo 2.0l and she ordered the coil pack from that model as well.
Fortunately the Webcon harness comes with an oval connector (as a spare), so I spent the evening cutting off the new-style square connector and attaching the old-style oval one to the harness.
I attached the wires to the new old-style oval connector the same way they were connected to the old new-style square connector.
The worst that can happen is that the engine will not start because the spark is being delivered at BDC instead of TDC. Swop the 2 wires around I am back in business.
Doing some internet research I found that when they changed over the coil pack from the old oval type to the new square type the orientation of the wires was indeed changed over, so I disassembled my new old-style oval connector and swopped the wires. These things are not meant to be taken apart once they are put together with the result that the metal contacts are a bit munched. I will try and source a new old-style oval connector from Ford.
Confused yet??
With my luck they will send me a new new-style square one, instead of a new old-style oval one.....
Quick note to everyone reading or accessing this blog - PLEASE LEAVE COMMENTS IF YOU LIKE OR DO NOT LIKE WHAT YOU SEE AND READ!!
I see my count is on the rise - even from folks in Alaska.....?? I am trying to keep it light but unfortunately the content does require some technical talk!!
Sunday, 16 September 2012
The Cooling System
I've decided to create my own cooling system layout. In a previous post I made mention of hanging the pump off the engine. I changed that idea to making a bracket and attaching that to the chassis and hanging the pump off that.
After that the rest was simple. If the bracket shows signs of fatigue I will make it out of steel.
The top section from the rail to the radiator was even simpler. I now need a couple of banjo fittings and fitting the header tank and I am done with the cooling system.
After that the rest was simple. If the bracket shows signs of fatigue I will make it out of steel.
I took time out to dummy-fit the throttle bodies, and found out my carefully assembled linkage was fouling the left top cross-member. I reversed it and now the linkage operates smoothly. I cannot fit these yet as she must go to the paint shop first.
I also bought some black paint for the headers and the cam cover.
Subscribe to:
Posts (Atom)