Zorsts.......It's a Wrap!!!

Back again after a long gap, I've been busy sorting out the last maor component install, namely the exhaust system. When I left them, they had been painted heat resistant black, and I had decided to wrap the headers in some space age lava rock weave. I spent a bit of time waiting for the stuff, it is called DEI titanium exhaust wrap, and the local agent is Michael Moolman. At any rate he came through with the merch. I bought 2 off 2" *50ft rolls and it was just enough to wrap the exhausts.

Here are the contact details, or you can visit www.designengineering.com

Trinity Performance & Thermal Control

South Africa - Gauteng

Phone: 27(0)72 7669613

Unit 9 Pomona Park, Pomona Road, Pomona Kempton Park

Johannesburg, GT1620

Phone:27(0)72 7669613

If you want the definition of "cool"in the dictionary you will find that photo next to it.

The advantage of this new stuff over other wraps is you don't have to wet it first, and it doesn't need any silicon spray. The two outer headers were easily done, but the centre siamese twinned headers needed some dexterity!

Having done that, I pre-assembled the muffler and connector pipe and called it a night. I had a little hassle arranging the muffler guard brackets and was totally foxed as to how they fit the pipes until I saw they had been stamped "F" "M"and "R" (Front, Middle and Rear) Once I had sussed that the rest was easy.