Yesterday I installed the gauges and switches, today I wired them up and tested them for continuity and earthing. The switches remain unconnected, there are some issues with regard to the wiring colouring. I must just check the wires through the fusebox to the source, and the ammeter is not connected either.
I also installed the wiper motor, ignition switch and the driver's seat runners. The ignition switch was a bit of a struggle as I had to loosen the upper portion of the steering column so that the lock in the switch would engage the slot in the column.
At the back I fitted the fuel tank sender unit which only required a minor relieving of the hole to insert.
No comments:
Post a Comment